GHI系列（单／双层百叶风口）

单（双）层格栅风口叶片角度可0°～180°范围内任意调节，将叶片调节成不同角度，可以得到不同的送风距离和不同的扩散角，风口后部可以配上风量调节阀，将风量及风速控制在适当的范围内，风口表面经阳极氧化处理，也可按用户要求进行烤漆或静电喷塑，颜色按用户要求。
材质：铝合金／不锈钢／碳钢
可选附件：风量调节阀／风向角度调节装置
标记示例：GH1（型号）-------200×600（规格尺寸）
               GH2（型号）-------200×600（规格尺寸）

注：以上规格尺寸如无特殊标注，一般默认为风口的颈部尺寸。

GHI Series (sigle / double shutter outlet)

The blades angle of single / double grating outlet can be regulated within the scope of 0° ~ 180°, regulation of angle decide the air supply distance and direction, an air volume adjusting valve can be installed on the rear outlet, which can control the air volume and speed. The surface of the outlet is anodized or can also be stoving varnish or electrostatic spray, the color can be controled to meet the customers’ requirements.
Materials: aluminum alloy / stainless steel / carbon steel
Optional Accessories: air volume adjusting valve / direction angle controller

Tag example: GH1 (Model )------- 200 × 600 (spec./ dimensions)
               GH2 (Model )------- 200 × 600 (spec./ dimensions)

Note: The specifications above shall normally be considered as the neck size if no special marks.

GD系列（蛋格式）

蛋格式风口结构简单，压力损失小，可做出风口或回风口，固定式或门铰式．表面可按用户要求进行烤漆或静电喷塑，颜色按用户要求。
材质：铝合金／不锈钢
标记示例：GD1（型号）-------200×600（规格尺寸）
注：以上规格尺寸如无特殊标注，一般默认为风口的颈部尺寸。

GD series (grid type)

Grid outlet which is simple and little pressure loss, can be an outlet or return airway, fixed or hinged. The surface can be stoving varnish or electrostatic spray, the color can be controled to meet the customers’ requirements.
Materials: aluminum alloy / stainless steel
Tag example: GD (Model )------- 200 × 600 (spec./ dimensions)
Note: The specifications above shall normally be considered as the neck size if no special marks.

GH3系列（条形风口）

条形风口又称条形散流器，叶片为固定式，可用作风口和新风口，表面按用户要求进行烤漆或静电喷塑，颜色按用户要求。
材质：铝合金
叶片形式：直片条形／斜片条形／两面吹条形
标记示例：GH3--Z（型号）-------200×600（规格尺寸）
               GH3--X（型号）-------200×600（规格尺寸）
注：以上规格尺寸如无特殊标注，一般默认为风口的颈部尺寸

GH3 series (strip outlet)

Strip outlet is also known as the strip diffuser, with fixed blades, can be used as an outlet or a fresh airway. The surface is anodized and can also be stoving varnish or electrostatic spray, the color can be controled to meet the customers’ requirements.
Materials: aluminum alloy
Shape of Blades: straight strip / oblique strip / both sides blowing strip
Tag example: GH3-Z (Model )------- 1000 × 200 (spec./ dimensions)
               GH3-X (Model )------- 1000 ×200 (spec./ dimensions)
Note: The specifications above shall normally be considered as the neck size if no special marks.